|Length 70mmx Width 35mmx Height 400mm
|Catalytic Combustion Sensor, Electrochemical Sensor (depending On Sensor)
LCD Screen carbon monoxide detector,
Carbon monoxide alarm IP65,
ABS carbon monoxide detector
Detection gas Carbon Monoxide Carbon monoxide alarm with zero drift ±1% FS/ Year
Introducing Fire Smoke Detector, a household alarm apparatus that helps to protect you and your family from the potential risk of fire and smoke. This device is designed to detect carbon monoxide, smoke and other combustible gases in your home, and the alarm will sound if any of these gases are detected. The Fire Smoke Detector has a recovery time of less than 30 seconds, depending on the sensor, and complies with the implementation standards of GB/T3836.1-2021, GB/T3836.4-2021 and GB15322.3-2019. It can be used in an environment with an operating temperature and humidity of -10C°~50C°<95%RH, without condensation. The indication error is within ±5%FS and corresponds to the explosion-proof mark Ex Ib IIB T3 Gb (intrinsically safe). With this fire alarm, you can rest assured that your home is safe from the danger of fire, smoke, and carbon monoxide.
|Normal Atmospheric Pressure (101.325kPa)
|Alarm point setting
|Combustible: Low Alarm Value 20%LEL, High Alarm Value 50%LEL; Oxygen: Low Alarm Value 19.5%VOL, High Alarm Value 23.5%VOL; Hydrogen Sulfide: Low Alarm Value 10ppm, High Alarm Value 35ppm; Carbon Monoxide Low Alarm Value 50ppm, High Alarm Value 150ppm;
|Catalytic Combustion Principle, Electrochemical Principle
|T<30s (depending On Sensor)
|USB High Current 5V1A Fast Charger Compatible With Universal USB Phone Charger
The China International AI Expo ABH841 Fire Smoke Detector is the perfect solution to protect your home and family from the dangers of fire and smoke. This powerful device is equipped with a variety of features that make it a must-have for any home.
The ABH841 is equipped with a Battery Capacity 1800mAh, so it can be used for more than 10 hours once it is fully charged. It also has USB High Current 5V1A Fast Charger Compatible With Universal USB Phone Charger for easy charging. Additionally, it is lightweight and only weighs 250g.
The ABH841 is designed to detect fire and smoke through Catalytic Combustion Principle and Electrochemical Principle. The Catalytic Combustion Sensor and Electrochemical Sensor are supported depending on the sensors. This device will alert you to any potential danger before it becomes too serious.
The China International AI Expo ABH841 Fire Smoke Detector is the perfect home carbon monoxide alarm and alarm apparatus for every home. With its advanced detection capabilities and easy to use features, you can rest assured that your family is safe and protected from the dangers of fire and smoke.
The Fire Smoke Detector will be packaged and shipped as follows:
Q1: What is the brand name of the Fire Smoke Detector?
A1: The brand name of the Fire Smoke Detector is China International AI Expo.
Q2: What is the model number of the Fire Smoke Detector?
A2: The model number of the Fire Smoke Detector is ABH841.
Q3: Where is the Fire Smoke Detector manufactured?
A3: The Fire Smoke Detector is manufactured in the Chinese mainland.
Q4: What features does the Fire Smoke Detector have?
A4: The Fire Smoke Detector has a fast response time, a wide detection range, and low power consumption.
Q5: How do I install the Fire Smoke Detector?
A5: You should read the user manual carefully for installation instructions. It is recommended to install the Fire Smoke Detector in a central location in the room. Make sure the detector is mounted properly and securely to the ceiling or wall.
Contact Person: Mr. Hui Sheng
Tel: +86 18660407019